SoundCraft Si Series Quick Start Guide

Page 13Soundcraft® Si Series Quick Start Guide Issue 1010
ADDING A COMPRESSOR OR A NOISE GATE TO THE INPUT
CHANNEL
Here, we will use the ‘Channel Mode’ view.
Make sure you have pressed the SEL button above the input channel you want to
process, and press the ‘CHANNEL MODE’ DYN key to place the GATE +
COMPRESSORS for the selected channel across the 16 encoders.
Press the GATE IN or COMP IN button in the CHANNEL MODE area to switch the
Gate or Compressor function on.
You can now use encoders in the
LOWER ROW to adjust the
settings for the GATE or
COMPRESSOR. You will see GATE
and COMPRESSOR activity start
to occur on the OLED screen
above the input channel you are
processing.

SoundCraft Si Series Specifications

General

Model Variants	Si Expression, Si Performer, Si Compact, Si Impact
Built-in Effects	Lexicon effects engine
Type	Digital mixer
EQ Bands	4-band EQ per channel
Subgroups	4 subgroups
Effects Engines	Lexicon effects engine
Faders	Motorized faders
Display	Varies by model
Dimensions	Varies by model
Weight	Varies by model