Need help?Do you have a question about the SoundCraft SIGNATURE MTK and is the answer not in the manual?
General| Type | Analog |
|---|---|
| USB Interface | Yes |
| Faders | 100mm |
| Power Supply | Internal |
| Phantom Power | Yes |
| Aux Sends | 3 |
| Subgroups | 2 |
| Inputs - Line | 12 |
| Outputs - Main | 2 |
| Outputs - Other | headphone |
| Dimensions | 660 x 520 x 150 mm |
Instructions for installing Soundcraft multichannel audio drivers for low-latency operation on PC.
Guide to configuring Soundcraft USB audio interface settings like buffer size and streaming mode.
Details input patching for Mic/Line sources to USB channels 9/10.
Explains using USB channels 13/14 for recording the final LR stereo mix back to DAW.
Steps to configure PC audio settings for stereo playback through the console's USB channels.
Guide to setting up REAPER for multi-track recording with the Soundcraft Signature MTK.
Instructions for routing DAW playback channels back to the console in REAPER.
Steps to insert and use plug-ins on audio tracks within REAPER.
Guide to setting up LOGIC 9.1.8 for multi-track recording with the Soundcraft Signature MTK.
Instructions for routing DAW playback channels back to the console in LOGIC.
Steps to insert and use plug-ins on audio tracks within LOGIC.
Guide to setting up ABLETON LIVE LITE for stereo recording with the Soundcraft Signature MTK.
Steps to insert and use plug-ins on audio tracks within ABLETON LIVE LITE.
To Next Page