SoundCraft Si Series Quick Start Guide

Page 2 Soundcraft® Si Series Quick Start Guide Issue 1010
INTRODUCTION
Firstly, thanks for choosing the Soundcraft Si Series!
This Quick Start Guide will give you a good overview of the main features
of the console and will allow you to get up and running in the minimum
amount of time.
This guide will show you how to:
1. Power Up the console
2. Create a new SHOW
3. Get familiar with the OLED displays
4. Connect an Input Source
5. Use GLOBAL MODE to adjust Gains and Pans
6. Apply EQ and Dynamics
7. Add Lexicon Effects
8. Create Aux and Sub-Group Mixes
9. Create a Matrix Mix
10. Create VCA and Mute Groups
11. Store and name Snapshots
IMPORTANT
Please read this manual carefully before using
your mixer for the rst time.

SoundCraft Si Series Specifications

General

Model Variants	Si Expression, Si Performer, Si Compact, Si Impact
Built-in Effects	Lexicon effects engine
Type	Digital mixer
EQ Bands	4-band EQ per channel
Subgroups	4 subgroups
Effects Engines	Lexicon effects engine
Faders	Motorized faders
Display	Varies by model
Dimensions	Varies by model
Weight	Varies by model