How to fix SoundFreaq Sound Spot SFQ-07 Speakers when the power does not come on?
If your SoundFreaq Speakers aren't turning on, the built-in lithium battery may be depleted. To resolve this, charge the battery.
Why is there no sound output from my SoundFreaq Sound Spot SFQ-07 Speakers?
If your SoundFreaq Speakers aren't producing any sound, first, ensure that the volume level on both the speakers and your connected Bluetooth device isn't set to the minimum. Also, verify that your Bluetooth device is not muted. Finally, check if a stereo audio cable is connected to the AUX IN jack of the system, and if so, unplug it.
What to do if USB charging is not working on SoundFreaq Sound Spot SFQ-07?
If you're having trouble charging your device via the USB 5V jack on your SoundFreaq Speakers, it might be due to an unsupported USB cable. Try using a different USB cable. Also, the USB 5V jack power will be off if the volume setting is higher than the threshold value, or if the charging current exceeds 0.5A, making the charging function unavailable.
Why do my SoundFreaq Speakers power off automatically?
If your SoundFreaq Speakers system powers off automatically, it could be entering a saving energy mode. To resolve this, turn the system on again and play back an audio source. Alternatively, the internal battery might be exhausted, so charge the battery and then turn the system on again.
General| Brand | SoundFreaq |
|---|---|
| Model | Sound Spot SFQ-07 |
| Category | Speakers |
| Language | English |
Install the system in a level, dry, and temperature-controlled location with adequate ventilation.
Ensure no obstructions around the unit, maintain air paths, and use a stand for bottom ventilation.
Follow national legislation for recycling electronic waste at designated collection points.
Dispose of the product according to applicable national legislation and local rules.
Verify all included items such as the main unit, USB power cable, and aux cable.
Connect the system to a USB power source using the provided USB power cable.
Understand LED indicators for charging status (green/white blinks) and low battery.
Tap VOL+ and VOL- buttons to check battery level via LED indicator (color and blinks).
Details the VOL, PAIR, and ON/Standby buttons and their functions.
Identifies AUX IN, AUX OUT, Sound Effect Switch, 5V IN, and USB 5V jacks.
Press the ON/Standby button to turn the system on or off.
Use VOL+ and VOL- buttons to adjust the volume level.
Slide the Sound Effect Switch for FLAT, BRIGHT, or WARM EQ settings.
Enable/disable power saving mode using PAIR and Play/Pause buttons.
System automatically switches to AUX IN when cable is inserted, and to Bluetooth when removed.
Pairing process: power on, tap PAIR, select 'Sound Spot' on device, enter password '1234'.
Tap PAIR to switch between previously paired Bluetooth devices.
Connect via Bluetooth preferences, select 'Sound Spot', and choose 'Use as Audio Device (Stereo)'.
Add 'Sound Spot' via Device and Printers, then connect for music playback.
Use stereo audio cable to connect digital music players to the AUX IN jack.
Use stereo audio cable to connect the AUX OUT jack to speakers or amplifiers.
Connect AUX OUT of one system to AUX IN of another for stereo sound.
Connect USB devices to the USB 5V jack to charge them.
Solutions for no power, no sound output via Bluetooth or AUX.
Troubleshooting Bluetooth connection failures and USB charging issues.
Details model, Bluetooth support, input sensitivity, terminals, power, dimensions, and weight.
To Next Page
