Need help?Do you have a question about the SoundMAGIC E11BT and is the answer not in the manual?
Press and hold the Multifunction button for 3 seconds to power on, indicated by an audio prompt.
Press and hold the Multifunction button for 3 seconds to power off, indicated by an audio prompt.
Turn off headset, hold Multifunction button for 5 seconds (LED flashes) to enter pairing mode. Search for E11BT on your smartphone.
Paired devices connect automatically within range (10m) and time (5 min). Reconnects if within range within 5 minutes after disconnection.
Use the Multifunction button to play/pause. Double-press '+' for next song, double-press '-' for previous song, hold '+' to fast forward.
Press Multifunction to answer/hang up. Press and hold for 2 seconds to reject the call.
During a call, press Multifunction for 3 seconds to hold current call and answer incoming call.
Press '+' to increase volume and '-' to decrease volume.
Double-press the Multifunction button to redial the last number.
Charge using a computer or 5V±0.2V USB outlet. Red light indicates charging; blue light indicates fully charged.
General| Type | In-ear |
|---|---|
| Driver Size | 10 mm |
| Driver Type | Dynamic |
| Frequency Response | 20 Hz - 20 kHz |
| Weight | 16 g |
| Wireless Range | 10 m |
| Sensitivity | 100 dB |
| Connectivity | Bluetooth |
| Bluetooth Version | Bluetooth 5.0 |
| Impedance | 16 ohms |
To Next Page
