CD9220 / English Instruction Manual
8
Troubleshooting
TECHNICAL SPECIFICATIONS
Power Supply: AC 100-240V ~ 50/ 60Hz , 150 mA Model: TBA0050500100VDE
DC output: 5V 1A
Batteries: DC 3V (AA x 2) (Optional, not supplied)
Battery playback time: 6-8 hrs (Alkaline battery)
Recharge battery type: Nickel–Metal Hydride (Ni-MH) 1.2V / AA size
Charging Time around 16 hours with 130 mA
IMPORTER
Wörlein GmbH Tel.: +49 9103 71 67 0
Gewerbestrasse 12 Fax.: +49 9103 71 67 12
D 90556 Cadolzburg Email: service@woerlein.com
Germany Web: www.woerlein.com
Technische Änderungen und Druckfehler vorbehalten
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.woerlein.com
Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH
No
power,
playback does not
start
– Insert the batteries correctly.
– Replace the batteries.
– Connect the mains adapter securely.
Hold indication and/
or no reaction to
controls
– Deactivate HOLD.
– Disconnect the set from the power to controls supply or take out the
batteries for a few seconds.
No sound or bad
sound quality
– Press to resume playback.
– Adjust the volume.
– Check and clean the connections.
– Keep this set away from active mobile phones or strong magnetic
fields.
„dISC“ / „Err“/ error
message
– Insert a disc, label upwards.
– Clean or replace the disc.
– Wait until the steamed up lens has cleared.
– Make sure you have inserted an audio disc or an MP3/WMA-CD.
– Make sure the inserted CDR or CD-RW is recorded correctly.
– Make sure that the file names of the MP3 files end with .mp3 /
WMA files end with .wma
Missing directories on
MP3-CD
– Make sure the total number of files and albums on your MP3/WMA-
CD does not exceed (MP3+WMA) 600 and (CD) 99 respectively.
– Only albums with MP3 files are shown. Other computer data file is
skipped.
– Clean or replace the disc.
– Make sure REP, INTRO, RND, ALL or PROG are not selected.
Music skips or
popping sound when
playing an MP3 file
– Play the music file on your computer. If the problem persists, encode
the audio track again and make a new CD-ROM.