IR43DAB / English Manual
13
For the wireless connection, you will be asked for input encryption in the next step.
Standard encrypted network
To enter the network’s key, use the navigate reel or direction keys on the remote control to
move the cursor through the characters and press to confirm. As each character is
selected, the key is built up near the top of the display.
There are three options accessible by tuning the navigate reel back before the first characters –
Backspace, OK and Cancel.
WPS encrypted network
WPS encrypted networks are identified by WPS at the start of the network name when the
IR43DAB searches the available AP. Use one of the following methods of connection:
There is the shortcut WPS key on the unit.
Push button
IR43DAB prompts you to press the connect button on the router. It then scans for a
ready Push Button Connect network and connects.
To Next Page
Loading...