SOUNDMASTER IR43DAB - 4 Getting Started

IR43DAB / English Manual
8
4. Getting Started
The items enclosed in the packaging box are as follows:
- IR43DAB unit
- Power adaptor
- Remote control
- RCA Audio cable(RCA to RCA)
- FM antenna
- WiFi antenna
- BT antenna
- User manual
Connect the FM antenna, WiFi antenna and Bluetooth antenna to the back of IR43DAB.
And connect the RCA audio cable to the Line out jacks of IR43DAB and your own speaker.
Then connect the power adaptor to the back of IR43DAB and plug it into power socket. (Turn
on your own speaker if need audio out.)
Get the network environment ready
 For wired Ethernet
Use an Ethernet cable (RJ45 jack) to connect the LAN ports on IR43DAB and your network
device. Check if the light indicators on the network device are in appropriate status.
 For wireless WiFi
Make sure you have setup the wireless network and you have the WEP, WPA or WPA2
security password to activate the connection.
You may also use the WPS (WiFi Protected Setup) function for easy pairing between the
network device and IR43DAB. Check if the light indicators on the network device are in
appropriate status.