IR43DAB / English Manual
16
Enter to search AP SSID, then input the WEP / WPA key or choose Push Button/Pin/Skip WPS to
connect to the wireless network.
Push Button Configuration, it is to connect the AP that supports WPS (Wi-Fi Protected Setup).
View the information of current connected network: Active connection, MAC address, Wlan
region, DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS and Secondary
Select the Wlan region to obtain the optimal Wlan connectivity: Canada, Spain, France, Japan,
Singapore, Australia, and Republic of Korea.
Choose wired or wireless network connection and enable or disable DHCP (Dynamic Host
IR43DAB remembers the last four wireless networks it has connected to, and automatically
tries to connect to whichever one of them it can find.
From here you can see the list of registered networks. You can delete unwanted networks by
turning and pressing then choosing YES to confirm delete.