SOUNDMASTER SCD1900 - Technical Specification

SCD1900 / English Instruction Manual
5
AUX-IN
A 3.5mm stereo AUX IN socket is located at the back of the unit. Analogue audio sound signals
from other sources can be input to the unit through this socket.
1. Use a cable with 3.5mm jack to connect the input to other analogue audio source.
2. To select AUX IN, repeatedly press the “Mode” button until “AU” is displayed.
3. Press the Volume +/- button to adjust for your desired sound output level.
HEADPHONE
A 3.5mm type stereo headphone jack is located at the back of the unit. Connect a stereo
headphone (not included) to this jack for private listening without disturbing others. The speakers
are automatically disconnected when the headphones are in use.
IMPORTANT: When using headphones always set the volume to a low level before you put the
headphones on. Then insert the headphones and gradually increase the volume to a comfortable
listening level.
TECHNICAL SPECIFICATION
Power input
: 100-240V~ 50/60Hz
Battery power
: 6 x 1,5V “C”-size battery (not included)
FM range
: 87.5 – 108MHz
Preset Stations
: 20
Audio power output
: 2x 1W RMS
IMPORTER
Wörlein GmbH Tel.: +49 9103 71 67 0
Gewerbestrasse 12 Fax.: +49 9103 71 67 12
D 90556 Cadolzburg Email: service@woerlein.com
Germany Web: www.woerlein.com
Technische Änderungen und Druckfehler vorbehalten
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.woerlein.com
Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH