SOUNDMASTER SCD5750 - Usb Operation; Tape Operation

SCD5750 / English Instruction Manual
4
USB OPERATION
Whenever connected to microphone are available for playback and record to cassette.
GENERAL OPERATION
PLAY / PAUSE►▌▌ Press to start playing tracks from the USB.
Press again to stop playing USB operation temporarily.
Press again to resume playback.
SKIP + ►►▌ & SKIP - ▌◄◄ Press to go to the next track or back to the previous track.
Press and hold while playing until you find the point of the sound.
STOP ■ Press to stop all USB operation.
ALBUM+ Press to go to next folder (only available for MP3 file with folder)
PLAYBACK
1. Plug or slot in USB device to the port.
2. Press the "FUNCTION" button to select “USB” mode.
3. Reading is performed and total number will show on display.
4. Playback will start automatically from the first track.
5. Press the “PLAY / PAUSE” button when you want to stop playback temporarily.
6. Press the “STOP” button when finished.
PROGRAM / MODE
The operation of “PROGRAM”, “MODE” are as the same as that of “CD / MP3”. Please refer to “CD / MP3
OPERATION”.
TAPE OPERATION
GENERAL OPERATION
PAUSE ▌▌ Press to stop playing tape operation temporarily.
Press again to resume tape operation.
STOP Press to stop tape operations.
Press again to open the cassette door after the tape spools stop turning.
FAST FORWARD ◄◄ & Press to start rapid tape winding either forward or reverse direction.
REWIND ►►
PLAY ► Press to start playing tape.
RECORD ● Press it together with “PLAY” button to start recording.
PLAYBACK
1. Press the “FUNCTION” button to select “TAPE” mode.
2. Press the “STOP / EJECT” button to open the cassette door and insert your tape.
3. Close the cassette door.
4. Press the “PLAY” button to start playing tape.
5. Press the "VOL+" or "VOL-" button to the desired volume level.
6. Press the “PAUSE” button when you want to stop playing tape operation temporarily.
7. Press the “STOP / EJECT” button when finished.
Note: Microphone cannot operate in tape playback mode.
RECORDING
1. Press the “STOP / EJECT” button to open the cassette door and insert a blank tape.
2. Select the source you want to record.
3. To record from radio - Press the “FUNCTION” button to select “RADIO” mode and adjust the desired
station.
4. To record from CD - Place a disc on the CD compartment. Press the “FUNCTION” button to select “CD”
mode and select the desired track.
5. Press the “RECORD” button together with the “PLAY” button to start recording.
6. Press the “STOP / EJECT” button when finished.