MUTE FUNCTION
Press the MUTE button to stop the sound from the speaker temporarily, the sound stops and the display
will show ³0XWHG´ and flash.
To cancel mute, press the MUTE button again or press the VOLUME +/-, ³0XWHG´ disappears in the display
and the sound is restored.
DISPLAY
BACKLIGHT
There are four backlight levels for you to set in unit operation.
To set the backlight, repeatedly press the BACKLIGHT button and the brightness of the display will
change in the below sequence on every press:
Backlight
off >
Backlight
01 >
Backlight
02 >
Backlight
03 >
Backlight
off !««
During standby, the backlight is defaulted to be ³%DFNOLJKt ´, and it will be turned on to full brightness for
5 seconds on every key press. Press the BACKLIGHT button will toggle the display backlight level
between ³%DFNOLJKt off´ and ³%DFNOLJKt ´
Note:
The display backlight level is defaulted to ³%DFNOLJKt 01´ in standby and ³%DFNOLJKt 03´ during
operation. This is resumed only when the factory reset has taken place.
SPECIFICA
TION
POW ER SUPPLY: AC 100-240V~60/50Hz
OUTPUT POW ER : 1 W
FREQUENCY RANGE : DAB 174 - 240 MHz
FM 87.5 - 108 MHz
UNIT DIMENSION : 160 (L) x 130 (W) x 60 (H) mm
WEIGHT: 0.53kg
SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.
To Previous Page
