UR2045 / English Instruction Manual
6
When “RESET” is shown, press the “Enter” button to confirm, the display will show “PRESS
OK”. Press the “Enter” button again, the unit will reset and set the unit into factory default.
All settings and stored radio stations will be deleted!
After the reset, the display show “UPDATE” on the display.
8. Software version
When “VERSION” is shown, press the “Enter” button to confirm. The display will show
installed software version.
Technical changes and misprints reserved.
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.soundmaster.de
Duplication only with the permission of Woerlein GmbH
To Next Page
Loading...
