Soundoff Signal MPower PMP2BK004 - User Manual

1
1.800.338.7337 / www.soundo󰀨signal.com
PMPSABK002 1122 REV B
2021-2023 CHEVROLET TAHOE POLICE & CIVILIAN (LS AND Z71 MODELS)
FOR USE WITH THE 3 & 4” STUD MOUNT MPOWER
®
LIGHTS*
PMP2BK004 - GRILLE MOUNT BRACKET, 2 MODULE
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage.
To review our Limited Warranty Statement & Return Policy for this or any SoundO Signal product, visit our website at www.soundosignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4).
Questions or comments that do not require immediate attention may be emailed to techservices@soundosignal.com.
ENHANCING SAFETY THROUGH INNOVATION
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat build-up and re. Follow crimp connector
manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle Owner’s Manual for deployment zones.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or re.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring conguration and proper integration of
system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal or local chassis ground (-) must be
sized to supply at least 125% of max. current and properly fused at power source.
•Install protective grommets when routing wire through rewall or metal.
WARNING
CONTENTS
QTY COMPONENT
1 1 MODULE DRIVER SIDE BRACKET
1 1 MODULE PASSENGER SIDE BRACKET
2 RETAINING BRACKET
*mpower Sold Separately
A A
B B
C C
D D
E E
F F
G G
H H
J J
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
21 POL TAHOE Grille Bracket Isheet Images 2 mod
MATERIAL:
REVISION:
DESCRIPTION:
SHEET
2 OF 5
DRAWING NO:
OVERALL ASSEMBLY SHOWN*
INTRODUCTION:
mpower
®
Fascia Light Features:
• 3” and 4” Stud Mount Options available for this bracket
design
• Collaboration with Dow Corning® to develop ClearDuty™
optical design
• Greater resistance to gravel pitting, scratching, or cracking
• Improved sealing to prevent water from entering light
• Higher UV and thermal stability to prevent lens from
yellowing over time

Summary

Introduction to mpower Fascia Light Features

mpower Fascia Light Features Overview

Details features of mpower fascia lights including stud options, optical design, durability, sealing, and UV stability.

General Safety Warnings

Critical Safety Precautions and Guidelines

Highlights critical safety warnings for high current, air bag zones, electrical connections, and proper installation by trained technicians.

Installation Instructions

Bracket Placement and Initial Mounting

Notes correct bracket placement on the grille's emblem and guides initial mounting of the passenger side bracket and module.

Preparation and Component Installation

Details removing the radiator cover, positioning the passenger side bracket, and loosely threading nuts onto studs.

Passenger Side Bracket and Retaining Bracket

Explains using bracket tabs for correct positioning, attaching the retaining bracket, and tightening module studs to 15 in-lbs.

Driver Side and Final Reassembly

Instructs repeating steps for the driver side bracket and reinstalling the front grille and radiator cover.

Soundoff Signal MPower PMP2BK004 Specifications

General

IP Rating	IP67
Voltage	12V DC
Length	4.5 inches
Operating Temperature	-40°F to +160°F
Certifications	SAE J595
Current Draw	0.5A
Power Output	6W
Material	Polycarbonate