Need help?Do you have a question about the SoundTraxx tsunami2 steam and is the answer not in the manual?
General| Brand | SoundTraxx |
|---|---|
| Model | tsunami2 steam |
| Category | Media Converter |
| Language | English |
Introduction to the Tsunami2 Digital Sound Decoder and its features.
Basic operation and features of the Tsunami2 decoder.
Explains Configuration Variables (CVs) and how to program them.
Details programming modes, reading CVs, and related concepts.
Setting primary and extended addresses for the decoder.
Adjusting key decoder settings like direction and speed steps via CV 29.
Customizing acceleration, deceleration, and braking rates.
Enabling and configuring a 28-point custom speed table.
Adjusting forward/reverse drive voltages for speed matching.
Customizing lighting effects, brightness, and Hyperlight features.
Configuring lighting direction, flash rate, and brightness levels.
Selecting and customizing sound effects like whistles, bells, and airpumps.
Tailoring steam engine sounds like fuel type and exhaust.
Setting master and individual sound effect volume levels.
Setting up an alternate volume mixer for sound effects.
Enabling automatic sound effects for various operations.
Adjusting the clickety-clack sound effect rate and scale.
Configuring the frequency of Fireman Fred's tasks.
Demonstrates customizing various steam sound effects.
Adjusting audio response with high-pass filter and equalizer.
Configuring equalizer frequency levels for speaker sizes.
Adding reverb effects to sound effects.
Adjusting Dynamic Digital Exhaust parameters for realistic engine sounds.
Reassigning effects to function keys using Flex-Map.
Configuring automatic effects based on direction and movement.
Mapping effects to the emergency stop button.
Advanced motor control for smooth operation and speed regulation.
Setting up consists for multi-unit operation.
Example of configuring a double-header consist.
Enabling and configuring operation in analog mode.
Enabling functions for analog mode operation.
Configuring automatic effects for analog mode.
Setting the track voltage for motor activation in analog mode.
Setting track voltage for exhaust chuff sound in analog mode.
Common problems and solutions for decoder operation issues.
Explains LED indicators for troubleshooting.
Lists and explains decoder error codes.
To Next Page
