Source ST9715 Secure MICR - Error Messages; Cartridge Related Errors; Specific MICR Error Messages

Source Technologies ST9715 Secure MICR Printer User’s Guide
23
Error Messages
Your secure MICR printer has a set of front panel error messages unique to MICR
applications. These messages appear if there is a MICR related problem. The printer
may also print an error message on the page near where the error occurred. In many
cases you can receive more information about a displayed error by pressing Continue.
See the base printer’s User Guide for posted errors on the operator’s panel not listed
below.
Cartridge Related Errors
Error Message
on Display
Printed
Message
Description
Action
41.xx Cartridge,
imaging unit
mismatch
N/A
The printer may have
the wrong cartridge or
wrong IU installed.
These supplies must
both be either MICR or
standard (non-MICR)
Check labels and install
matched components
84.xx – Imaging
unit low
N/A
The IU will soon need
to be replaced. 5% life
remains.
Press CONTINUE to
continue printing.
88.xx – Cartridge
is low
N/A
The amount of toner in
the cartridge is getting
low. 10% life remains.
Press CONTINUE to
continue printing.
Install MICR
Cartridge
N/A
Before printing a MICR
document, the printer
checks for MICR toner
supplies. If regular
cartridge and IU are
installed, the printer will
stop all printing and
display this message.
Replace the standard
toner cartridge and
standard IU with a MICR
toner cartridge and IU. If
MICR toner is not
available, you must
power-off your printer and
restart the print job at a
later time when MICR
toner is available.
84.xx - 0 pages
remain, replace
imaging unit
N/A
The imaging unit is at
End-Of-Life. It needs
to be replaced.
Replace only the imaging
unit. The toner cartridge
need not be replaced.
88.xx – 0 pages
remain, replace
the cartridge
N/A
The toner cartridge is
empty and needs to be
replaced
Replace only the toner
cartridge. The IU need not
be replaced.