To Next PageTo Next PageWhat to do if pilot lights, but burner does not on Southern Pride Smoker?
If the pilot light is on but the burner isn't igniting on your Southern Pride Smoker, check for loose wire connections at the valve and control module. Also, try cleaning the igniter rod.
What to do if the burner does not fire on my Southern Pride Smoker?
If the burner on your Southern Pride Smoker isn't firing, begin by verifying that there's 24 volts at the ignition control module. Additionally, ensure the centrifugal switch is clean and inspect the condition of the ignition wire. Cleaning the electrode and checking the spark gap (1/8”) are also recommended.
Why does my Southern Pride Smoker burner spark but not fire?
If your Southern Pride Smoker's burner sparks but doesn't ignite, start by removing any ash from the burner head. Confirm that the gas supply is turned on and check the supply line pressure. Also, clean the electrode.
How to troubleshoot a blower motor that doesn't run on a Southern Pride Smoker?
If the blower motor on your Southern Pride Smoker isn't running, check to see if 120v is present at the blower motor.
Why does the pilot light on my Southern Pride Smoker light but not stay lit?
If the pilot light on your Southern Pride Smoker lights but doesn't stay lit, check the igniter-sensor probe and wire.
General| Model | SRG Series |
|---|---|
| Category | Smokers |
| BTU | Varies by model |
| Cooking Area | Varies by model |
| Cooking Capacity | Varies by model |
| Mobility | Stationary |
