Southwire BENDMAX BML-2000 - Product Description; Safety Guidelines; Manual Purpose

1
TABLE OF CONTENTS
Description .................................................................................2
Safety .........................................................................................2
Purpose of this Manual...............................................................2
Important Safety Information………………………………….…3-8
Grounding Instructions………….….…………………….…...…...9
Identification..............................................................................10
Features.....................................................................................11
Transportation...........................................................................11
Setup……………………………………………………….............12
Operation................................….……….….……….............13-14
Bending……………………….….……….….………….......…14-16
Specifications............................................................................17
Troubleshooting........................................................................18
Warranty..............................................................................19-20
2
DESCRIPTION
The Southwire BENDMAX™ Compact Power Bender is intended to
bend 3/4" to 2" conduit and pipe. This bender has the capability to
accommodate the following types of conduit and pipe:
• Electrical Metallic Tubing
• Intermediate Metallic Conduit
• Galvanized Rigid Conduit
SAFETY
Safety is essential in the use and maintenance of Southwire Tools
and Equipment. This instruction manual and any markings on the
tool provide information for avoiding hazards and unsafe practices
related to the use of this tool. Observe all the safety information
provided.
WARNING - Read and understand all instructions and safety infor-
mation in this manual before operating or servicing this tool.
PURPOSE OF THIS MANUAL
This manual is intended to familiarize all personnel with the safe
operation of the Southwire BENDMAX™ Compact Power Bender.
Keep this manual available to all personnel. Replacement manuals
are available at no charge at www.southwiretools.com.
All specifications are nominal and may change as design improve-
ments occur. Southwire Company, LLC shall not be liable for dam-
ages resulting from misapplication or misuse of its products.