Sovereign SHT 26 - User Manual

Need help?

Do you have a question about the Sovereign SHT 26 and is the answer not in the manual?

Summary

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
General Safety Rules (as highlighted in the guide)
Customer Support
Unpacking Instructions

This document serves as a Quick Start Guide for a Sovereign Powered Garden Engineering hedge trimmer, providing essential safety information, unpacking instructions, fuel/lubrication details, and starting procedures.

Function Description:

The Sovereign hedge trimmer is a powered garden tool designed for trimming hedges and shrubs. It operates using a 2-stroke engine that requires a specific fuel mixture. The guide outlines the steps to prepare the tool for operation, including fueling and starting the engine, and emphasizes safety precautions to be taken during its use.

Important Technical Specifications:

Fuel Type: Regular grade unleaded petrol.
Oil Type: Quality 2-stroke oil.
Fuel Mixture Ratio: 40:1 (40 parts fuel to 1 part 2-stroke oil). This precise ratio is critical; failure to use the correct mixture will cause the engine to seize.
Engine Type: 2-stroke engine (implied by the fuel mixture requirement).

Usage Features:

Starting Procedure:
1. Add the prepared fuel mixture to the hedge trimmer's fuel tank.
2. Switch the Ignition to the "I" (on) position.
3. Set the Choke lever to "ON."
4. Secure the throttle lever.
5. Push the primer bubble 10 times.
6. Pull the starter cord rapidly 4 or 5 times. The exact amount of choke needed may vary slightly depending on the external temperature.
7. Allow the engine to warm up at half throttle for a short period, then push the choke in fully.
Controls: The device features a Choke Lever, Primer Bubble, Ignition Switch, Throttle Lever, and Throttle Lever Lock, all clearly labeled in the provided diagrams to facilitate operation.
Portability: As a hedge trimmer, it is designed for outdoor use and is likely a handheld or shoulder-slung device, though specific details on its weight or carrying mechanisms are not provided in this guide.
Safety Features: The guide strongly emphasizes safety, requiring users to wear safety goggles, gloves, safety shoes, and hearing protection. It also stresses the importance of reading the full user manual before operation.

Maintenance Features:

Fuel/Lubrication: Proper fuel mixture preparation is a key maintenance aspect. Users must mix unleaded petrol with 2-stroke oil in a 40:1 ratio using the provided mixing bottle. The container should be shaken gently to ensure proper mixing. This is a critical step to prevent engine damage.
Included Items for Maintenance/Assembly: The package includes a plug spanner and a spanner, which are essential tools for basic maintenance and assembly tasks. A blade guard is also included for safety during storage and transport.
Spare Parts Availability: Spare parts are available, and customers can contact customer service for inquiries, indicating support for long-term maintenance and repair.

General Safety Rules (as highlighted in the guide):

Read the user manual before using the machine.
Wear safety goggles to protect eyes from possible injury.
Wear gloves to protect hands.
Wear safety shoes to protect feet.
Wear hearing protection.

Customer Support:

Customer Service Hours:
- Monday-Thursday: 08:45 am - 5:00 pm
- Friday: 08:45 am - 3:15 pm
Customer Service Phone Number: 0151 649 1500
Spare Parts: Available through customer service.

Unpacking Instructions:

Open the carton carefully and remove all items.
Ensure all included items (plug spanner, spanner, mixing bottle, blade guard) are present before discarding the packaging.

This Quick Start Guide is specifically intended for experienced users who have already assembled the tool, advising them to refer to the full manual for more detailed information.