Need help?Do you have a question about the SP Scientific VIRTIS ADVANTAGE PRO and is the answer not in the manual?
Provides a general description of the VirTis AdVantage Pro lyophilizer and its features.
Highlights the main features and capabilities of the AdVantage Pro freeze dryer.
Details the AdVantage Pro series freeze dryer.
Instructions for inspecting the equipment upon receipt to check for shipping damage.
Provides guidance on safely lifting and moving the freeze dryer unit.
Steps for positioning and setting up the AdVantage Pro unit.
Detailed instructions for installing the required vacuum pump.
Explains the purpose and procedure for backfilling with inert gas.
Describes how to operate the optional stoppering system.
Introduction to Quickseal valves and their operation.
Guidance on using Quickseal valves during the freeze-drying process.
Details the optional Vacuum Break Solenoid valve.
Explains the function and operation of the Liquid Nitrogen Trap.
Describes the filter trap and its installation/maintenance.
Overview of vacuum system maintenance procedures.
Instructions for changing the vacuum pump oil.
Procedure for inspecting and maintaining the door gasket.
Maintenance guidelines for the air-cooled condenser and compressor.
Guides users through diagnosing and resolving vacuum-related issues.
Addresses troubleshooting steps for product melting during freeze-drying.
Instructions for installing and using the shelf latching kit.
A chart detailing various serum vial capacities and quantities.
Recommendations for cleaning stainless steel components.
Chemical resistance guide for acrylic components.
Chemical resistance guide for the AdVantage Pro bezel.
Chemical resistance guide for the AdVantage Pro front panel.
Chemical resistance guide for the AdVantage Pro top.
General| Model | VIRTIS ADVANTAGE PRO |
|---|---|
| Type | Freeze Dryer |
| User Interface | Touchscreen |
| Control System | Microprocessor-based |
| Temperature Range | -70°C to +60°C |
To Next Page
