Spa Builders SC-MP - Tools and Parts Identification

Tools & Parts
Tools, test equipment and components needed to carry
out SC-CF and SC-MP spa pack service calls.
Required tools:
Required pack parts:
Spa Builders Systems Group sells Professionnal Repair Kits that include everything needed for SC-CF and SC-MP spa pack
servicing. For more information, go to the last page of this manual.
Pliers
Phillips & flat screwdrivers
11/32 " nut driver
1/4 " open end wrench
3/8 " open end wrench
Jumper cable
Multimeter
GFCI tester & digital thermometer (optional)
Fuses
Pressure Switch
Regulation sensor
Top side control (keypad)
SC-CF / SC-MP complete pack