Spa Dynamix Vitala - Installation Guide

Installation GuideInstallation Guide
Installation Guide
You now have all the information you need to start installing and using your Spa
Dynamix® VITALA® massage chair. This section features a step-by-step guide
to unboxing and setting up your chair. Follow the instructions closely, as this
product contains several important components.
Step 1: Unpacking Your Chair
Start by laying a blanket down to protect your oor. Remove the chair frame
from the box and place on the blanket. Carefully remove armrests and set aside.
Reference your materials list to ensure you have all the parts required for assembly.
Step 2: Assemble the Backrest
Carefully unfold the backrest on the Massage Chair Main Body until you hear a
clicking sound. This means your chair back is locked and ready for use.
Step 3: Assemble the Armrests
NOTE: Before assembling your armrests, ensure the remote control is in the middle
of the seat to avoid trapped cords. Use the illustrations provided as a reference.
A. Use a Phillips head screwdriver to unscrew the M6 screws from the seat base.
B. Locate the xed bolt on the side of the seat base. This will align with the
xed hole on the armrest of your seat.
C. Align the armrest with the corresponding bolts on the seat base. Press
components together until ush. Screw components together using M6 screws.
Power Cord
Remote ControlBack Cushion
Seat Cushion
Massage Chair Main Body
Pillow
1211