What to do if Spacelabs Blood Pressure Monitor displays 'LLL' and the alarm sounds?
If your Spacelabs Blood Pressure Monitor displays 'LLL' and the alarm sounds, it indicates that the main battery is low. To resolve this, immediately turn OFF the monitor and replace the batteries to continue monitoring.
What to do if Spacelabs 90217 display is incorrect?
If the display is incorrect, it may be due to several reasons. First, the data may not be retained, in which case you should replace the backup battery. Second, there might be low or no power, so check the batteries and replace or recharge them as needed. Also, the issue might be a time-out, an air leak, improper cuff size, or the cuff not being properly attached. Try to isolate the cause and correct it.
Why does my Spacelabs Blood Pressure Monitor display “LLL” and alarm sound?
The monitor displays 'LLL' and the alarm sounds because of a low main battery condition. Immediately power OFF the monitor and replace the batteries within 60 seconds to continue monitoring.
Why does my Spacelabs 90217 Blood Pressure Monitor (90207 only) display event code “Lbb” during selftesting?
The monitor displays event code “Lbb” during self-testing because of a low backup battery condition. Replace the backup battery before continuing.
Why is my Spacelabs Blood Pressure Monitor display incorrect?
An incorrect display on your Spacelabs Blood Pressure Monitor may be due to several reasons. It could be caused by data not being retained, in which case you should replace the backup battery. Another cause can be low or no power; check the batteries for a full charge and replace or recharge them if needed. Also, the issue might be related to a time-out, an air leak in the system, using the wrong cuff size, or the cuff not being properly attached. Try to isolate the cause and correct it.
What to do if Spacelabs 90217 Blood Pressure Monitor displays 'LLL' and alarm sounds?
If your Spacelabs Blood Pressure Monitor displays 'LLL' and an alarm sounds, this indicates a low main battery condition. Immediately turn off the monitor and replace the batteries within 60 seconds to continue monitoring.
What does event code Lbb mean on Spacelabs 90217?
If your Spacelabs Blood Pressure Monitor (90207 only) displays event code Lbb during self-testing, it indicates a low backup battery condition. Replace the backup battery before continuing.
What to do if my Spacelabs Blood Pressure Monitor cuff is too tight?
If the cuff is too tight, it could be because the cuff was placed on the patient too tightly. Reposition the cuff. Another possible cause is the air pump staying on too long, in which case you should return the monitor to Spacelabs Healthcare for service.
What to do if my Spacelabs Blood Pressure Monitor cuff is too loose?
If the cuff is too loose, it might be because it was placed on the patient too loosely. Reposition the cuff. Another possible cause is the air pump not staying on long enough, in which case you should return the monitor to Spacelabs Healthcare for service.
How to fix incorrect time displayed on Spacelabs Blood Pressure Monitor?
The time displayed may be incorrect because the batteries were removed for more than one minute. Re-initialize the monitor.
General| Product Name | Spacelabs 90217 |
|---|---|
| Category | Blood Pressure Monitor |
| Measurement Method | Oscillometric |
| Type | Ambulatory Blood Pressure Monitor |
| Cuff Size | Small, Medium, Large, Extra Large |
| Dimensions | 120 x 80 x 30 mm |
| Communication | USB |
| Interface | USB |
| Compliance | AAMI, ESH |
To Next Page
