Do you have a question about the Spacetalk Adventurer and is the answer not in the manual?
Resolution | 240 x 240 pixels |
---|---|
GPS | Yes |
Water Resistance | IP67 |
Compatibility | iOS and Android |
Camera | No |
SOS Button | Yes |
Storage | 4GB |
Display | 1.4 inch TFT LCD |
Connectivity | 4G LTE |
Operating System | Custom OS |
Weight | Approx. 60g |
Requires Nano SIM with voice, SMS, and data. Works on Australian networks.
Follow provided instructions for activation, potentially needing ID. Recharge credit after activation.
Turn off watch, remove SIM cover, insert SIM, replace cover, power on. Charge if needed.
Download from app stores, install, grant permissions, register account.
Choose subscription based on device count. Supports up to 5 devices. Purchase via app store.
Tap 'Tap to pair' on watch, scan QR code with app, set up profile, confirm.
Hold to power on/off. Double tap display to wake. Optimizes battery life.
Install latest updates via Settings menu for optimal performance. Automatic checks.
Reduce screen brightness, increase location update intervals, use Location on Demand.
Share access with trusted users without extra subscription. Primary/Secondary holder steps provided.
Check signal, SIM activation, credit, power cycle, and reset device.
Avoid short location intervals, update software, check SIM credit.
Visit website for FAQs/tips or contact via email/phone.