SPAL SHAVED-40 - User Manual

SHAVED-40
INSTALLATION MANUAL & OPERATION INSTRUCTIONS
®
Our most popular kit comes complete with (1) seven-channel receiver, (2)
remote transmitters and (2) solenoids with 40 pounds of pull each. This kit
also includes all necessary hardware for installation. The SHAVED-40 kit of-
fers enough pull to open virtually any door on the market today.
®
Li m i t e d Wa r r a n t y St a t e m e n t
SPAL USA Wa r r a n t y St a t e m e n t
SPAL USA warrants this product to be free from defects in
material and workmanship for a period of one (1) year from
the date of sale to the original purchaser, and not more than
two (2) years from the date of manufacture. SPAL USA will
repair this product free of charge if, in the judgment of SPAL
USA, it has been proven defective within the warranty pe-
riod. The product should be returned, at the customer ex-
pense, to the location of original purchase. This warranty
does not cover any expenses incurred in the removal and/
or reinstallation of the product.This warranty does not apply
to any product damaged by improper installation, accidental
misuse, abuse, improper line voltage, fire, flood, lightning, or
other acts of God, or a product altered or repaired by anyone
other than SPAL USA.This warranty is in lieu of other warran-
ties, expressed or implied, including any implied warranty of
merchantability. No person is authorized to assume for SPAL
USA any other liability concerning the sale of this product.
IMPORTANT-KEEP YOUR INVOICE WITH THIS WARRANTY STATEMENT!
1731 SE Oralabor Road • Ankeny, IA 50021
Sales: 800-345-0327 • Fax: 800-654-7725
Tech Support Line: 800-454-7725 (M-F / 8am - 5pm CST)
tech@spalusa.com • www.spalusa.com
JayCorp Technologies
order at www.jaycorptech.com
866-529-2677

Summary

Limited Warranty Statement

Product Features and Operation

Features

Details on the SHAVED-40 kit's components and capabilities, including transmitters, solenoids, and range.

Operation

Explanation of the 10-pin connector wiring and spade terminal connections for system operation.

Installation and Configuration

Programming Transmitters

Instructions on how to add or re-program up to four transmitters to the SHAVED-40 receiver.

System Settings

Details on jumper, DIP switch, and transmitter settings for customizing system behavior.

Emergency Backup Switch

Recommendation and wiring diagram for installing an emergency backup switch for system access.

Mounting and Wiring

Guidelines for mounting the control module and wiring solenoids, including ground connection importance.

Wiring Options

Channels 3 Through 7 Wiring

Wiring diagrams and relay types for activating functions on channels 3 through 7.

Trunk Opening Wiring

Wiring configurations for both positive and negative trunk release solenoids using the SHAVED-40.

Advanced Wiring and Requirements

Reverse Polarity Output

Explanation and diagram for reverse polarity systems, requiring a switch that rests at ground.

Minimum Install Requirements

Essential requirements and considerations for a safe and effective installation of the system.

SPAL SHAVED-40 Specifications

General

Brand	SPAL
Model	SHAVED-40
Category	Automobile Electronics
Language	English