SPALDING ACCUGLIDE 6A1042 - Page 19

Assemble the Backboard
19
G
ASSEMBLE THE BACKBOARD
3. Attach the upper elevator tubes (42) to the upper pole section (4) using the bolt (43), spacer (20),
and nut (40).
4. Securely tighten all the bolts.
#20
#4
#20
#40
Elevator Tube
Orientation
#42
#42
#43
5. Attach the lower elevator tubes (41) to the upper pole section (4) using the bolt (43), spacer (20),
and nut (40).
6. Attach the lower elevator tubes (41) to the gas strut vertical elevator tubes (52) using the bolts
(43), spacers (29 and 55), and nuts (40).
7. Securely tighten all the bolts.
8. Attach the pole cap (22).
#22
#20
#20
#62
#40
#43
#29
#41
#41
#62
#55
#55