Why does my SPANARCI Power Tool show different battery levels when inflating compared to standby?
The voltage level of the lithium battery significantly drops while discharging power, which causes the battery level indicator to show different displays when inflating compared to the standby state.
What to do if my SPANARCI SANDY 2000 air compressor turns on but does not inflate?
1. Check whether the air compressor's battery level is sufficient. 2. Check whether the pressure of the item being inflated exceeds the preset pressure.
What to do if my SPANARCI SANDY 2000 Power Tool has air leakage after connecting the air tube?
Make sure the air hose is securely connected.
Why is the inflation speed slow on my SPANARCI Power Tool?
1. Check whether the air compressor's battery level is sufficient. 2. Check whether the air hose is leaking. 3. Check whether both ends of the air hose are securely connected. 4. Check whether the item that is being inflated is leaking.
What to do if the battery level indicator doesn’t show on the screen after charging my SPANARCI SANDY 2000?
Use a certified adapter and the included charging cable, and try charging again.
Why can't my SPANARCI SANDY 2000 Power Tool inflator charge other devices?
1. Make sure the remaining battery level is sufficient. 2. The inflator cannot charge other devices while inflating.
General| Brand | SPANARCI |
|---|---|
| Model | SANDY 2000 |
| Category | Power Tool |
| Language | English |
Describes how the battery level is shown by four bars, with each bar representing 25%.
Instructions for fully charging the inflator before first use and indicators during charging.
Instructions for long-pressing the power button to turn the inflator on and off.
Lists conditions under which the inflator will automatically turn off after inactivity or specific events.
Explains connecting the inflator to Schrader valves on cars, motorcycles, and bikes.
Instructions for using the adapter with Presta valves on road and mountain bikes.
Details on using the needle adapter for inflating balls like basketballs and footballs.
Connect the air tube to the device after turning on the inflator to display the current pressure.
Ensure awareness of maximum inflation pressure to prevent injuries from over-inflation.
Recommended air pressure for tires is indicated on the sidewall or driver's door.
Recommended air pressure for balls is indicated near the ball's air valve.
Provides recommended pressure ranges for bicycles, cars, motorcycles, and various types of balls.
Steps to choose usage scenario, units, and set the desired pressure value using buttons.
Details on switching between Car, Bicycle, Motorcycle, and Ball modes with default settings.
How to increase/decrease target pressure value and quickly adjust it using plus/minus buttons.
Pressing '+' and '-' buttons simultaneously displays the real-time battery voltage.
Instructions for turning the inflator's light on/off by long-pressing the light button.
How to cycle through Spotlight, SOS, and OFF modes by pressing the light button while it's on.
Press the power button to start inflating and notes on noise levels and heat.
Automatic stopping upon reaching target pressure or manual stopping by pressing the power button.
Warning that items like balloons cannot be automatically inflated due to low pressure requirements.
Caution to exercise caution when disconnecting the hot air hose to prevent injuries and pressure loss.
Inflator can be used as a PD20W & 5V/3A power bank when not in use, requires sufficient charge.
Note that the inflator automatically turns off in energy-saving mode after disconnecting the charged device.
Explains error codes like 'Lo' (low power) and 'E02' (temperature protection).
Solutions for slow inflation speed, including checking battery, leaks, and connections.
Troubleshooting steps if the air compressor turns on but does not inflate, checking battery and pressure.
Ensures the correct mode is set and mentions manual mode for pressure adjustment.
Explanation that low-pressure inflatables may show zero pressure as it's too low to measure.
Ensuring the air hose is securely connected to prevent air leakage after connecting the tube.
Explains why battery level indicator might differ between standby and inflating states.
Troubleshooting steps if the battery indicator does not show after charging, suggesting checking adapter/cable.
Notes that the inflator cannot charge other devices while inflating and requires sufficient battery.
Details product name, model, physical dimensions, and air valve dimensions.
Covers inflation pressure range, operating/storage temperatures, battery capacity, working noise, and sensor accuracy.
Details input/output ports, power ratings, and charging time for the inflator.
Warnings about product use by children, overheating, damage, water exposure, and battery handling.
Guidance on storing the product within temperature limits and maintaining battery effectiveness during long storage.
Information on DC motor sparks, use in hazardous environments, and immediate action for unusual noise or heat.
Emphasis on correct pressure unit selection to prevent dangerous over-inflation.
Advice on using the product in dry/clean environments, avoiding water, and using certified chargers.
Caution against exposing to rain, storing indoors, and connecting USB-A port with USB-C port.
To Next Page