Note
1. Press the once to choose the usage scenario from
2. Press the for a few seconds until the icon of the unit blinks, press once to choose the units you want from KP PSI and Bar.
3. Wait for 5 seconds until the unit icon stops bilking then press the to set the pressure value.
4. Press the to pump anything you want.
Switch Modes
Click the to switch between the four inflation modes below.
8. PRESET PRESSURE VALUE
- 13 -
Car Mode: Default 2.5bar
Adjustable Range: 1.8-3.5bar
Motorcycle Mode: Default 2.4bar
Adjustable Range: 1.8-3.0bar
Bicycle Mode: Default 45psi
Adjustable Range: 30-145psi
Ball Mode: Default 8psi
Adjustable Range: 4-16psi
To Next Page
Loading...