Need help?Do you have a question about the SpaNet SV4 and is the answer not in the manual?
Guidance on filling the spa to minimize air pockets and facilitate priming.
Steps to resolve the ER-3 Water Prime fault code.
Explains the function and meaning of the heartbeat LED for spa pack status.
Troubleshooting steps for the ER-2 Heater Plug error code.
Details on the ER-3 Water Prime fault: causes and solutions.
Information on ER-4 Thermal Trip: activation, causes, and reset procedures.
Troubleshooting for ER-5 Pool Too Hot error: causes and cooling solutions.
Details on ER-6 12V Overload fault: causes and how to resolve.
Troubleshooting for ER-8 CTRL FAULT HVS: causes and solutions.
Explanation of ER-10 Over Current error: causes and corrective actions.
Lists heat pump fault conditions and their corresponding warning messages.
Details on service reminder messages like 'SERVICE FILTERS' and how to manage them.
Guidance on the default service reminder for cleaning and servicing spa filters.
Provides contact information for Spa Net Pty Ltd head office.
Guidance on filling the spa to minimize air pockets and facilitate priming.
Steps to resolve the ER-3 Water Prime fault code.
Explains the function and meaning of the heartbeat LED for spa pack status.
Troubleshooting steps for the ER-2 Heater Plug error code.
Details on the ER-3 Water Prime fault: causes and solutions.
Information on ER-4 Thermal Trip: activation, causes, and reset procedures.
Troubleshooting for ER-5 Pool Too Hot error: causes and cooling solutions.
Details on ER-6 12V Overload fault: causes and how to resolve.
Troubleshooting for ER-8 CTRL FAULT HVS: causes and solutions.
Explanation of ER-10 Over Current error: causes and corrective actions.
Lists heat pump fault conditions and their corresponding warning messages.
Details on service reminder messages like 'SERVICE FILTERS' and how to manage them.
Guidance on the default service reminder for cleaning and servicing spa filters.
Provides contact information for Spa Net Pty Ltd head office.
The device is a SpaNet SV Series Advanced Spa Control unit, designed to manage and automate various functions of a spa, including heating, filtration, and accessory operation. It features self-diagnostics and scrolling error messages to assist with troubleshooting.
The SpaNet SV Series Advanced Spa Control unit serves as the central control system for a spa. It manages the spa's heating element, filtration pump, jet pumps, air blowers, and other accessories. The controller initiates a water priming sequence on startup to purge air from the plumbing system, running the filtration pump for up to 20 seconds at a time. If successful, normal operation begins; otherwise, it will shut down and latch on a fault code (ER-3 Water Prime). The unit continuously monitors the presence of water in the heater tube via an in-heater water sensor. If air bubbles are detected during operation, it automatically cancels current operations and forces a water priming sequence. The system also incorporates a red flashing "heartbeat" LED to indicate its current health and status. A single flash in a constant pulse signifies correct functioning without errors, while a sequence of flashes corresponds to specific error codes.
General| Brand | SpaNet |
|---|---|
| Model | SV4 |
| Category | Controller |
| Language | English |
To Next Page
