SpaNet SV SmartLINK - User Manual

SpaNet SV SmartLINK Specifications

General

Brand	SpaNet
Model	SV SmartLINK
Category	Controller
Language	English

Summary

Overview

Check SV Controller Software Version

Ensures the SV controller has the correct software version for the SpaLINK app and WiFi module to function correctly.

How to check software version

Details the steps to navigate the SV diagnostic menu and check the controller's software version using the spa-side keypad.

Key Press Operation

Explains the button presses required on the spa-side keypad to access and view the software version.

Fitting SmartLINK Module to Spa

Connecting SmartLINK Module when Expand Port 1 (EXP1) is already in use

Provides a step-by-step guide for connecting the SpaLINK module when the EXP1 port is already occupied by another cable.

Indicator LEDs

WiFi Internet Access Required

SpaLINK App Overview

Installing the SpaLINK App on your smart device

Guides users on downloading and installing the SpaLINK app from the App Store or Google Play.

Register a User Account

Explains the mandatory process of creating a SpaNET user account to configure the spa and WiFi module.

Configure your Spa;WiFi module

Spa List Screen

Online;Offline Spas

Explains why spas may appear offline and how to refresh the list to reconnect.

Edit Spa List

Troubleshooting Spa;WiFi Module Configuration

Ensure WiFi module has entered Infrastructure Mode

Steps to manually set the WiFi module to Infrastructure Mode if it fails to switch automatically from Hot Spot Mode.

Delete the spa and run the setup process again

Recommends deleting the spa from the list and re-running the setup process if initial configuration fails.

SV WiFi network not showing in smart device WiFi List (Master Reset)

Legal Information