I C Jumper highlighted LED Jumper Highlighted
Never worked with solder jumpers before or need some tips? Take a look at our How to Work with Jumper Pads and PCB Traces Tutorial.
Board Dimensions
The SparkFun Real Time Clock Module - RV-8803 (Qwiic) is built to the standard 1 x 1" size for Qwiic Breakouts. One thing you may notice is this board's
lack of mounting holes. In order to fit the 1 x 1" standard for Qwiic Breakouts, there was no space for mounting holes as the battery holder takes the
space normally reserved for those mounting holes.
Hardware Assembly
2
To Next Page
Loading...
