SPC BANG - Auxiliar Mode Operation

15
EN
8. Press the button to pause or continue the
reproduction. Keep it press to disconect the speaker
from the connected Bluetooth device.
AUXILIAR MODE
1. Slide the switcher to the ON position.
2. Connect the device to the speaker with the 3.5mm
auxiliar cable included.
3. Start the reproduction in the connected device.
4. Press the button to mute the speaker. Press it again
to reactivate the sound.
5. Press the button to decrease the volume.
6. Press the button to increase the volume.
7. Keep pressed the button to cancel the connection
with the device. Keep it pressed to reconnect it again.
NOTES: With the device muted, the reproduction doesn’t stop. You
will be able to control the reproduction volume with the connected
device.