16
HANDS-FREE MODE
1. Slide the switcher to the ON position.
2. Switch on the Bluetooth in your device to find “SPC
BANG” in the Bluetooth detected devices list and
press on it to connect. The light of the speaker will be
permanent now.
3. When you receive a phone call, the bluetooth speaker
will emit the call sound. To answer, press the button.
To finish the phone call, press again the button.
CHARGING THE BATTERY
The device contents an internal rechargeable battery,
before using the device, make a full charge with the USB
cable. To make this battery recharging you will have to
connect the micro USB cable, included in the box, to a
USB port. You can connect it to a USB in a PC or a power
adaptor. During the charge, the red LED will be on. Once the
charge is fully made it will switch off.
To Next Page
Loading...
