SPC BANG - Bluetooth Mode Operation

14
1. Speaker/Microphone
2. button: Decreases the volume
3. button: Increases the volume
4. button: Previous song
5. button: Next song
6. button: Pauses/Continues the reproduction.
Disconnects from the Bluetooth device
7. 3.5mm auxiliar cable input
8. Power supplier input
9. Battery indicator LED
10. ON/OFF switch
BLUETOOTH MODE
1. Slide the switcher to the ON position.
2. Switch on the Bluetooth in your device to find “SPC
BANG” in the Bluetooth detected devices list and
press on it to connect. The light of the speaker will be
permanent now.
3. Start the reproduction in the connected Bluetooth
device.
4. Press the button to decrease the volume.
5. Press the button to increase the volume.
6. Press the button to go a song backwards.
7. Press the to go a song forwards.