32
TURNING ON / OFF THE DEVICE
Switch on the device by pressing the key (4) during some
seconds. This process needs some time, you have to wait
until it nishes.
The rst time you power the unit on, a conguration wizard
will appear, follow the steps until the end. Once completed,
the main desktop will be shown, where you can see the
bottom information bar, some shortcuts to different
functions, and the icon to access the menu.
To switch the device off, keep pressing the key (4) during
some seconds. Press “Power off” to conrm.
Next time you power it on, it will go to locking screen, you
have to press and move the lock icon upward.
NOTE: To activate the power saving mode and lock the screen,
press the (4) key once. The screen will switch off but the device
will continue powered on. To activate it again, press once again the
key (4) and then, move with the nger the lock icon to the right
posistion.
If at any time the device does not work correctly or if it gets
blocked, insert a sharp object and press the switch inside (10).
To Next Page
Loading...
