Need help?Do you have a question about the SPE ware CEREX System-48-II and is the answer not in the manual?
General| Brand | SPE ware |
|---|---|
| Model | CEREX System-48-II |
| Category | Computer Hardware |
| Language | English |
A clean, oil-free gas source is essential to prevent sample contamination. Compressed nitrogen is recommended.
Describes various collection tube racks and sizes compatible with the processor.
Explains how to physically key and position the tube and column racks for proper operation.
Pressing two blue buttons simultaneously to open or close the compression mechanism.
Similar to compression, requires simultaneous button presses until movement stops.
Explains how flow restrictors maintain manifold pressure and gas usage efficiency.
Utilizes toggle switches to control gas flow to individual rows of 12 columns.
Uses rotameter and needle valve for slow, precise flow control (0-2.5 SCFH).
Adjusts pressure via MAX FLOW regulator for viscous samples or column drying.
Turns nitrogen flow on/off; should be off during decompression.
Regulator knob pulls out to adjust and pushes in to lock desired pressure.
Clean solvent spillage or overflow immediately to prevent instrument damage.
The silicone rubber column seal can be cleaned with methanol.
The processor is warranted for 90 days; repairs depend on non-abuse.
Spare parts like waste bins and seals are available beyond the warranty period.
Provides heated gas to improve analyte recovery and solvent selectivity.
Operates on 110 VAC at 13 amps; preset to 45°C with minimal heat-up time.
Patented technology using microparticulate sorbents for high capture efficiency.
Smaller paths ensure better analyte trapping, higher recovery, and reproducibility.
Illustrates Cerex's higher analyte capture capacity via a loading experiment.
Available in non-polar, polar, ion-exchange, and mixed-mode chemistries.
Offered in syringe-barrel tubes and 96-well formats with various bed sizes.
Offer outstanding performance and advantages over conventional vacuum manifolds.
To Next Page