Need help?Do you have a question about the SpeakerCraft AIM7 Two and is the answer not in the manual?
General| Type | In-Ceiling Speaker |
|---|---|
| Tweeter | 1 inch |
| Impedance | 8 Ohms |
| Woofer Size | 7 inch |
| Frequency Response | 40Hz - 20kHz |
| Power Handling | 125 Watts |
| Grille | Paintable |
Identify the primary area where listeners will be located for optimal sound.
Guidance on placing stereo or front home theater speakers for optimal sound.
Position the center channel speaker centrally between front left/right speakers above the screen.
Place rear channel speakers behind the primary listening area for surround sound.
Identify and avoid ceiling obstructions like joists, electrical, or plumbing during placement.
Instructions for installing speakers in a newly built ceiling structure.
Instructions for installing speakers into an existing, finished ceiling.
Pivot the woofer using fingertips to direct sound towards the listener.
Gently pivot the tweeter to fine-tune sound direction after woofer adjustment.
Move switches on the speaker's inner side to adjust treble and bass settings.
Details the results of -3dB, 0dB, and +3dB settings on frequency and impedance.
Specifications for the AIM7 Two model, including drivers, impedance, and power.
Specifications for the AIM7 Three model, including drivers, impedance, and power.
Specifications for the AIM7 Four model, including drivers, impedance, and power.
Specifications for the AIM7 Five model, including drivers, impedance, and power.
To Next Page
