What to do if SpeakerCraft Big Bang BB50-S will not turn on?
If your SpeakerCraft Amplifier isn't turning on, ensure it's plugged into a working outlet and the power switch on the front is flipped to the 'on' position. Also, verify that one of the TRIGGER inputs is switched ON and the trigger source is active (high).
What to do if no sound is heard from one side of SpeakerCraft Big Bang BB50-S?
If you're experiencing sound from only one side of your SpeakerCraft Amplifier, there might be an issue with the speaker wires or audio cables. Ensure they are correctly wired and functioning properly by testing the channel with a known working speaker. Also check that the front mounted level adjustment on the silent side is not turned all the way down and that the speaker is working.
General| Total Harmonic Distortion | < 0.1% |
|---|---|
| Input Impedance | 47k Ohms |
| Frequency Response | 20Hz - 20kHz |
| Amplifier Class | Class AB |
| Impedance | 8 Ohms |
Covers 17 essential safety guidelines for operating and maintaining the appliance.
How to activate and adjust the BB50-S using an audio signal.
How to activate the BB50-S using a video signal.
How to activate the BB50-S using a DC or AC voltage trigger.
Addresses issues like no sound, hum, and unit not turning on.
Details power output, THD, input sensitivity, and impedance.
Lists specifications for trigger inputs, DC 12V OUT, and AC Outlet.
Outlines what the warranty covers and excludes.
To Next Page
