Need help?Do you have a question about the SpeakerCraft CRS6 Zero and is the answer not in the manual?
Speaker Specifications| speaker type | 2-Way In-Ceiling |
|---|---|
| tweeter | Pivoting 1" Silk Dome |
| woofer | 6[1]⁄2" Polypropylene Cone with Rubber Surround |
| impedance | 8ohm |
| sensitivity | 92dB 1W/1m |
| frequency response | 40Hz - 20kHz ± 2dB |
| power recommendations | 100 watts (undistorted) |
| diameter x depth | 9[13]⁄16" x 4" |
| ceiling cut out | 8[1]⁄4" |
Speaker Specifications| speaker type | 2-Way In-Ceiling |
|---|---|
| tweeter | Pivoting 1" Silk Dome |
| woofer | 6[1]⁄2" Polypropylene Cone with Filleted Rubber Surround |
| impedance | 8ohm |
| sensitivity | 92dB 1W/1m |
| frequency response | 40Hz - 20kHz ± 2dB |
| power recommendations | 100 watts (undistorted) |
| diameter x depth | 9[13]⁄16" x 4" |
| ceiling cut out | 8[1]⁄4" |
Speaker Specifications| speaker type | 2-Way In-Ceiling |
|---|---|
| tweeter | Pivoting 1" Silk Dome |
| woofer | 6[1]⁄2" Glass Composite Cone with Filleted Rubber Surround |
| impedance | 8ohm |
| sensitivity | 92dB 1W/1m |
| frequency adjustments | Front-Mounted 3 Position ±3dB Treble Adjustment Switch |
| frequency response | 40Hz - 20kHz ± 2dB |
| power recommendations | 120 watts (undistorted) |
| diameter x depth | 9[13]⁄16" x 4" |
| ceiling cut out | 8[1]⁄4" |
Speaker Specifications| speaker type | 2-Way In-Ceiling |
|---|---|
| tweeter | Pivoting 1" Aluminum Dome |
| woofer | 6[1]⁄2" Aluminum Cone with Dual Voice Coil & Filleted Rubber Surround |
| impedance | 8/6/4ohm depending on switch settings |
| sensitivity | 90dB 1W/1m |
| frequency adjustments | Front-Mounted 3 Position ±3dB Treble Adjustment Switch & ±3dB Bass Adjustment Switch |
| frequency response | 40Hz - 20kHz ± 2dB |
| power recommendations | 125 watts (undistorted) |
| diameter x depth | 9[13]⁄16" x 4" |
| ceiling cut out | 8[1]⁄4" |
Speaker Specifications| speaker type | 2-Way In-Ceiling |
|---|---|
| tweeter | Pivoting 1" Aluminum/Magnesium Dome |
| woofer | 6[1]⁄2" Aluminum/Magnesium Cone with Dual Voice Coil & Filleted Rubber Surround |
| impedance | 8/6/4ohm depending on switch settings |
| sensitivity | 90dB 1W/1m |
| frequency adjustments | Front-Mounted 3 Position ±3dB Treble Adjustment Switch & ±3dB Bass Adjustment Switch |
| frequency response | 37Hz - 20kHz ± 2dB |
| power recommendations | 150 watts (undistorted) |
| diameter x depth | 9[13]⁄16" x 4" |
| ceiling cut out | 8[1]⁄4" |
To Next Page
