To Next PageTo Next PageWhat to do if my Spear & Jackson S2211PW has no pressure?
If your Spear & Jackson Pressure Washer isn't building enough pressure, it might be due to an air pocket in the hose or clogs in the inlet pipes. First, turn off the machine. Then, run it without the high-pressure hose until water flows without bubbles. Finally, reattach the high-pressure hose.
How to fix pressure variations in Spear & Jackson S2211PW?
If you're experiencing significant pressure variations with your Spear & Jackson Pressure Washer, the nozzle might be blocked, or the inlet water supply could be restricted. Try cleaning the high-pressure jet nozzle with the provided nozzle pin. Also, ensure that the inlet hose is not twisted or kinked to allow proper water flow.
General| Brand | Spear & Jackson |
|---|---|
| Model | S2211PW |
| Category | Pressure Washer |
| Language | English |
