To Next PageTo Next PageWhy my Spear & Jackson S3635CC does not start?
If your Spear & Jackson Chainsaw doesn't start, it could be due to several reasons. First, ensure the battery pack is correctly attached. If it's not, attach it properly. Second, the battery pack might be discharged, in which case you should remove and charge it. If the battery pack is damaged or there is another electrical defect, have it checked by a specialist electrician.
What to do if Spear & Jackson S3635CC Chainsaw suddenly stops?
If your Spear & Jackson Chainsaw suddenly stops, it might be because the product is overloaded. Remove the chainsaw from the workpiece and switch it on again. Another reason might be that the battery pack is discharged, so remove and charge the battery pack. Finally, the battery pack could be too hot; in this case, remove the battery pack and let it cool down.
How to fix Spear & Jackson S3635CC not reaching full power?
If your Spear & Jackson Chainsaw does not reach full power, it could be due to a low battery pack capacity; remove and charge the battery pack. Alternatively, the air vents might be blocked, so clean the air vents.
Why is my Spear & Jackson S3635CC Chainsaw making excessive vibration or noise?
Excessive vibration or noise in your Spear & Jackson Chainsaw can be caused by a dull or damaged accessory; replace it with a new one. Also, check if bolts/nuts are loose and tighten them.
What to do if Spear & Jackson S3635CC gives unsatisfactory result?
If you are getting an unsatisfactory result with your Spear & Jackson Chainsaw, it could be that the accessory is worn; replace it with a new one. Another possibility is that the accessory is not suitable for the intended operation; use a suitable accessory.
Explains all warning symbols used throughout the manual.
Details symbols for charger and battery pack safety.
Guidelines for safe workspace, electrical practices, and operator well-being.
Instructions for safe handling and maintenance of battery-powered tools.
Crucial safety advice for handling and storing battery packs.
Precautions for safe operation and maintenance of the battery charger.
Essential safety rules for operating the chainsaw.
How to avoid kickback, EMF hazards, and other residual risks.
Defines the product's purpose and restrictions.
Identifies all components included in the product packaging.
Steps for unboxing and verifying product contents.
Instructions for ensuring correct chain tension.
Guidance on how to fill the chainsaw's oil reservoir.
How to safely insert and remove the battery pack.
Methods to determine the remaining charge level of the battery.
Procedure for recharging the battery pack using the charger.
Procedure for attaching the battery to the chainsaw.
Steps to detach the battery from the chainsaw.
How to operate the power switch and verify oil levels.
Ensuring proper chain tension for safe and efficient cutting.
How to use and verify the functionality of the chain brake.
Methods for safely cutting down trees.
Methods for safely cutting logs into lengths.
Proper techniques for making vertical cuts.
Regular checks and cleaning for optimal performance.
How to lubricate the guide bar sprocket tip.
Steps to ensure uniform wear and lubrication of the guide bar.
Explanation of low kickback chains and safety.
Procedures for chain tension, break-in, lubrication, and replacement.
Ensuring adequate oil delivery for the chain and bar.
Instructions for environmentally responsible product disposal.
Guides to diagnose and resolve issues with the chainsaw.
Detailed technical information about the chainsaw and its components.
Details of the manufacturer's warranty and exclusions.
Explains all warning symbols used throughout the manual.
Details symbols for charger and battery pack safety.
Guidelines for safe workspace, electrical practices, and operator well-being.
Instructions for safe handling and maintenance of battery-powered tools.
Crucial safety advice for handling and storing battery packs.
Precautions for safe operation and maintenance of the battery charger.
Essential safety rules for operating the chainsaw.
How to avoid kickback, EMF hazards, and other residual risks.
Defines the product's purpose and restrictions.
Identifies all components included in the product packaging.
Steps for unboxing and verifying product contents.
Instructions for ensuring correct chain tension.
Guidance on how to fill the chainsaw's oil reservoir.
How to safely insert and remove the battery pack.
Methods to determine the remaining charge level of the battery.
Procedure for recharging the battery pack using the charger.
Procedure for attaching the battery to the chainsaw.
Steps to detach the battery from the chainsaw.
How to operate the power switch and verify oil levels.
Ensuring proper chain tension for safe and efficient cutting.
How to use and verify the functionality of the chain brake.
Methods for safely cutting down trees.
Methods for safely cutting logs into lengths.
Proper techniques for making vertical cuts.
Regular checks and cleaning for optimal performance.
How to lubricate the guide bar sprocket tip.
Steps to ensure uniform wear and lubrication of the guide bar.
Explanation of low kickback chains and safety.
Procedures for chain tension, break-in, lubrication, and replacement.
Ensuring adequate oil delivery for the chain and bar.
Instructions for environmentally responsible product disposal.
Guides to diagnose and resolve issues with the chainsaw.
Detailed technical information about the chainsaw and its components.
Details of the manufacturer's warranty and exclusions.
General| Brand | Spear & Jackson |
|---|---|
| Model | S3635CC |
| Category | Chainsaw |
| Language | English |
