Need help?Do you have a question about the Specialized Demo 8 and is the answer not in the manual?
General| Rear Travel | 200mm |
|---|---|
| Front Travel | 200mm |
| Brake Type | Hydraulic Disc |
| Stem | Specialized Direct Mount |
| Seatpost | Specialized Alloy |
| Suspension | Full |
| Tires | Butcher DH |
| Brakes | SRAM Code |
| Drivetrain | SRAM |
| Handlebar | Specialized DH |
| Saddle | Specialized |
| Rear Shock | RockShox Vivid |
Discusses the extreme nature and inherent dangers of off-road, stunt, and freeriding.
Provides crucial warnings and recommendations for bicycle maintenance and modifications.
Specifies compatible forks and warnings against using incompatible models.
Details how to find and use the seat post minimum insertion guide hole.
Lists detailed geometric measurements and component specifications for the Demo 8.
Provides rider weight ranges and suggested spring rates for shock setup.
Lists detailed geometric measurements and component specifications for the Demo 7.
Provides rider weight ranges and suggested spring rates for shock setup.
Instructions for achieving the recommended sag percentage on the rear shock.
Guidance on controlling the shock's return speed after compression.
How to set the IFP pressure for compression platform damping.
Adjusting ProPedal for pedaling efficiency and suspension bob.
How to modify the shock's resistance to bottoming out.
Correct positioning of the front derailleur cage relative to the chainring.
Warnings about potential saddle/seatpost contact with the rear wheel.
Step-by-step instructions for installing the guard with a Quick Release axle.
Step-by-step instructions for installing the guard with a solid axle.
Specifications for various bearings used in the frame's pivot points.
Specifications for bolts used in frame assembly and maintenance.
To Next Page