Need help?Do you have a question about the Specialized ENDURO FSR and is the answer not in the manual?
The Enduro FSR bicycles are intended and tested for Mountain Bike (condition 4) use only.
Please refer to the written warranty provisions provided with your bicycle, or visit www.specialized.com.
Details on headset specification, and ensuring no burrs or sharp edges on fork, stem, and seat tube.
Minimum insertion requirements for the seatpost to prevent frame damage and ensure rider safety.
Information about the 73mm BSA threaded bottom bracket shell and compatibility.
Specification for the 148mm Boost rear hub spacing and compatible rear wheel.
Instructions on how to change the flip chip position to adjust geometry.
Table detailing geometry measurements for S2, S3, S4, S5 frame sizes.
Lists item, part number, and specification for headset, seat collar, seatpost, etc.
Lists necessary tools such as Allen keys, Torx keys, torque wrench, and shock pump.
Provides general torque specifications for various bolts and fasteners on the bicycle.
Details bearing types, quantities, locations, and specs for spacers, axles, and bolts.
Instructions on applying green Loctite 603 to bearing surfaces and pressing bearings into pivot locations.
Step-by-step instructions for assembling the lower link, chainstay, and main pivot components.
Details on the SWAT CC (Conceal Carry) tool for steerer tube storage.
Instructions for using the down tube storage for tube, pump, and CO2 cartridges.
Procedure for setting air pressure and checking sag percentage on the rear shock.
How to adjust rebound damping for the rear shock to control return speed.
Explanation of compression damping settings (Open, Pedal, Lock) for the rear shock.
General| Brake Type | Hydraulic Disc |
|---|---|
| Seatpost | Specialized Command Post IR |
| Suspension | Full Suspension |
| Handlebar | Specialized, 7050 alloy, 8-degree backsweep, 6-degree upsweep |
| Stem | Specialized Trail, 6-degree rise |
| Saddle | Body Geometry Henge |
To Next Page