Need help?Do you have a question about the Specialized Enduro Comp and is the answer not in the manual?
Table detailing frame geometry specifications for different sizes (S2, S3, S4, S5).
Key component specs: headset, seatpost diameter, bottom bracket, tire clearance.
Details torque specifications for various bolts and fasteners for safety and proper assembly.
Detailed specifications for bearings used in various pivot points of the frame assembly.
Steps to set shock compression, rebound, and air pressure using a suspension calculator.
Guide to adjusting the shock's rebound damping for optimal ride feel and terrain conditions.
Explanation of compression damping settings (Open, Pedal, Lock) for shock performance.
General| Drivetrain | SRAM GX Eagle, 12-speed |
|---|---|
| Rear Derailleur | SRAM GX Eagle, 12-speed |
| Shifters | SRAM GX Eagle, 12-speed |
| Chain | SRAM GX Eagle, 12-speed |
| Frame Material | Alloy |
| Fork | 170mm travel |
| Brakes | 4-piston caliper |
| Tires | 29x2.5" |
| Seatpost | 34.9mm |
| Wheelset | 30mm inner width, tubeless ready |
| Front Hub | sealed cartridge bearings, 15x110mm spacing, 28h |
| Rear Hub | 12x148mm spacing, 28h |
| Crankset | SRAM GX Eagle, DUB, 170mm |
| Bottom Bracket | SRAM DUB |
| Cassette | 10-52t |
| Handlebars | 6-degree upsweep, 8-degree backsweep, 800mm width |
| Saddle | Bridge Comp, Hollow Cr-mo rails |
To Next Page