Specialized Enduro Comp - 5.2. Pivot Assembly: Upper Link @ Seat Tube; 5.2. Pivot Assembly: Mid Link @ Lower Link

13
2. UPPER LINK @ SEAT TUBE
R: UPPER LINK SPACER
15.1 ID x 23.5 OD x 3 W
CC: UPPER LINK BOLT
M15 x 20 L
 Grease, then place the upper link spacers (x2) R against the upper link bearings.
 Align the upper link with the seat tube pivot bore, then thread the upper link bolts (x2) CC
into the frame.
Place a small rag between the upper link and seat tube to prevent any damage
to the seat tube.
3. MID LINK @ LOWER LINK
S: EXTENSION SPACER
12.1 ID x 20 OD x 3 W
T: MID LINK SPACER
12.1 ID x 20 OD x 3 W
 Grease, then place the extension spacers (x2) S against the extension bearings.
 Grease, then place the lower mid link spacers (x2) T against the inside surface of the lower
mid link bearings.
 Align the mid link and extension with the lower link bore.