Specialized Enduro Comp - 5.2. Pivot Assembly: Dropout; 5.2. Pivot Assembly: Seatstay @ Upper Link

15
5. DROPOUT
V: DROPOUT OUTER SPACER
12 ID x 21 OD x 2.5 W
I I: DROPOUT BOLT
M11, 12 OD x 30 L
 Grease. then place the dropout (x4) V spacers against the dropout bearings, then align the
seatstay with the chainstay bore.
 Thread the dropout bolts (x2) I I into the dropouts.
6. SEATSTAY @ UPPER LINK
KK: UPPER LINK MALE BOLT
M9 x 14 L
JJ: UPPER LINK FEMALE AXLE
12 OD x 17.5 L
W: SEATSTAY INNER SPACER
12.1 ID x 17.5 OD x 4 W
X: SEATSTAY OUTER SPACER
12.1 ID x 20 OD x 3 W
 Grease, then place the inner spacers (x2) W and outer spacers (x2) X against the seatstay
bearings, then align the seatstay with the upper link.
 Grease, then slide the upper link axles (x2) JJ into the upper link from the inside, then
thread the upper link bolts (x2) KK into the axles.