Specialized Enduro Comp - 9. Rear Shock Installation; 10. Rear Shock Eye Bolt Installation

17
9. REAR SHOCK
1
2
 Slide the rear shock eye 1 into the extension, then guide the forward shock eye 2 into
position between the forward shock eye spacers.
NN: REAR SHOCK EYE BOLT
M8 x 29 L
MM: REAR SHOCK EYE WASHER
8.3 ID x 13 OD x 0.5 W
10. REAR SHOCK EYE
 Grease, then install the rear shock eye washer MM and bolt NN into the extension. Do not
torque until the end.