INTRODUCTION
THIS BRIEF ASSEMBLY GUIDE CONTAINS IMPORTANT INFORMATION.
PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE.
This Assembly Guide shows you how to build your bicycle from out of the box. The
directions covered in this guide are general guidelines and apply to all Specialized flat bar
(mountain/active) bicycles. If you’re unsure of the correct setup of your bicycle, contact
Specialized Rider Care or visit an Authorised Specialized Retailer.
This document is not intended as a use, service, repair, or maintenance guide. Please visit
an Authorised Specialized Retailer for all service, repairs, or maintenance.
Some bicycles come with a specific User Manual. This assembly guide is not a replacement
for your bicycle’s User Manual. The user manual contains important safety, performance,
and technical information specific to your bicycle, which you should read and keep for
reference.
You should also read the entire Specialized Bicycle Owner’s Manual (“Owner’s Manual”) as
it has additional important, general information and instructions you should follow. If you
don’t have a copy of the Owner’s Manual, you can download it at www.specialized.com or
obtain it from Specialized Rider Care or your nearest Authorised Specialized Retailer.
Additional safety, performance, and service information for specific components such as
suspension or pedals on your bicycle or accessories such as helmets or lights, may also
be available. In case of a conflict between the information in this assembly guide and
information provided by a component manufacturer’s manuals, please contact Specialized
Rider Care or an Authorised Specialized Retailer.
Please note all instructions and notices are subject to changes and updates without notice.
Please visit www.specialized.com for periodic tech updates.
To Next Page
Loading...
