9
visible damage, helmets should be replaced every three to
five years, depending on frequency of use, handling, and
storage conditions.
Helmets are designed to absorb one impact. That impact
can be from a crash, hitting something, or dropping the
helmet on a hard surface. Even if the helmet appears to
be undamaged after an impact, the protective capabilities
may have been reduced or diminished. That is because
the energy absorbing liner may become compacted, which
means the helmet no longer has the ability to absorb
a further impact. Make sure to inspect your helmet for
damage before each ride. When in doubt, replace the
helmet.
WARNING! A helmet has a limited lifespan in use
and should be replaced when it shows obvious
signs of wear. Even without visible damage,
helmets should be replaced every three to five
years, depending on frequency of use, handling,
and storage conditions.
WARNING! In the event of any impact or blow,
do not use this helmet. There may be invisible
damage that may decrease the helmet’s ability to
reduce the harmful effects of a blow to the head.
Such a helmet should be returned to Specialized
for inspection or destroyed and replaced.
and firmly press to engage until you hear an audible
“click.” Test the visor by trying to move it around to
make sure it is securely engaged.
5. CLEANING YOUR SPECIALIZED HELMET
Use only water, mild soap, and a non-abrasive cloth to clean
the helmet’s shell, pads, and retention system, then air-
dry. Do not use a heating source to dry your helmet as high
temperatures may irreparably damage it. Helmet pads may
be removable for cleaning but are not machine washable.
WARNING! This helmet can be damaged by
contact with common substances (for example,
certain solvents, such as ammonia, certain
cleaners, such as bleach, paints, abrasives), and
this damage may not be visible to the user. Do
not use this helmet if it has been exposed to such
substances. Do not paint your helmet.
WARNING! The helmet may be damaged and
rendered ineffective by petroleum and petroleum
products, cleaning agents, paints, adhesives and
the like, without the damage being visible to the
user.
6. LIFESPAN OF YOUR HELMET
Helmets are not designed to last forever. The protective
capability of your helmet will inevitably diminish over time,
dependent upon many factors such as dents or dings
caused by impacts, as well as exposure to pollution, harmful
chemicals, and long-term exposure to the sun. Even without
To Next Page
Loading...
