Scan mode at the HV302
Repeatedly pressing the button toggles
through pre-selected scan sizes 5°, 15°, 45°, 90°,
180°and 0 regardless if the unit is in automatic or
manual mode.
When set up horizontally in automatic mode, using
buttons increase/decrease the line size
in 5° increments. Press and hold button
moves the scan line to the right/left direction.
Note: The button can be used to stop the
scan mode immediately.
When used in automatic vertical mode, pressing and
holding button moves the scan line
counterclockwise/ clockwise. The buttons
moves the scan line into the right/left direction regardless
if in automatic or manual mode. For the first 4 seconds,
the scan line moves slowly than faster.
To Next Page
Loading...
